地波雷达组网探测高空目标优化布站

针对高空无人机等目标，建立基于高频地波雷达为主的2D雷达探测网，以目标高度估计和协同补盲为约束条件，对2D雷达网的优化布站问题进行理论计算和实例仿真，实验结果证明布站方法的有效性。     

基于改进 Gerstner 波的岛礁近岸波浪实时仿真?

为了实现岛礁附近波浪实时仿真，结合 Gerstner 波和水波动力学知识，提出了一种能够模拟波浪卷曲和折射绕射现象的波浪建模与绘制方法。首先，建立 Gerstner 波参数随水深变化关系，构建模拟波浪卷曲过程的几何模型；然后，定义岛礁地形对波浪传播的阻障和遮挡系数，并据此修正波浪传播的波向和波高，实现折射和绕射现象的仿真；最后，应用着色器缓存技术完成计算的硬件加速，并构建了基于视点的波浪传播多分辨率绘制策略。实验结果表明，该方法对波浪的卷曲和折射绕射现象取得了较好的仿真效果，绘制效率能够满足实时性要求。     

Effect of microstructure on short pulse duration shock initiation of TATB and initial response mechanism

Micro-TATB particles with different sizes and 3D nanoporous TATB architectures with different specific surface areas were prepared through recrystallization to study short pulse duration shock initiation properties by electric gun technology. For micro-TATB, the initiation threshold significantly decreases with TATB average size ranging from 79.7 μm to 0.5 μm. For 3D nanoporous TATB architecture, the initiation threshold decreases and then increases with specific surface areas increased from 9.6 m²/g to 36.2 m²/g. The lowest initiation thresholds are obtained for the micro-TATB with average sizes of 1.3 μm and 0.5 μm, and 3D nanoporous TATB architecture with specific surface area of 22.4 m²/g. The shock initiation thresholds of micro-TATB and 3D nanoporous TATB architectures show significantly decreases with the porosity increased. The decomposition reaction and thermal conductivity properties were further investigated to understand the initial response mechanism. High porosity provides more collapse sites to generate high temperature for formation of hot spots. The low thermal conductivity and decomposition temperature could enhance the formation and ignition of the hot spots, and initial decomposition reaction of TATB. The effect of the decomposition temperature is higher than that of the thermal conductivity on the shock initiation properties. The enhanced decomposition reaction could promote energy release and transfer process from the ignition to the combustion. This work offers a new insight to understand the effects of microstructure on the shock initiation properties and the initial response mechanism of TATB.     

Investigation on energy output structure of explosives near-ground explosion

In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions, the free-field shockwave, ground reflection shockwave and Mach wave overpressure time history of composition B explosive, RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors. The shape of the free-field shock wave, ground reflection shock wave, and Mach wave and explosion flame were captured by high-speed camera. The experimental results show that, at the same horizontal distance from the initiation point, the peak overpressure of explosive shock wave of composition B explosive, both in the air and on the ground, is less than that of RDX and aluminized explosives. At a distance of 3.0 m from the initiation point, the peak overpressure of aluminized explosives is slightly less than that of RDX explosives. Owing to the exothermic effect of aluminum powder, the pressure drop of aluminized explosives is slower than that of RDX explosives. At 5.0 m from the initiation point, the peak overpressure of aluminized explosives is larger than that of RDX explosives. At the same position from the initiation point, among the three kinds of explosives, the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum. With the increase of the horizontal distance from the initiation point, the height of Mach triple-points (Mach steam) of the three explosives increases gradually. At the same horizontal distance from the initiation point, there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive, and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives. The maximum diameter and duration of the fireball formed by aluminized explosives are the largest, followed by composition B explosive, and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.     

辐射叶加载的短波宽带鞭状天线优化设计

提出一款具有多层辐射叶结构的新型鞭状天线,在10 m鞭状天线体上设置不同的辐射叶层数、半径、长度、分支数、仰角及其分布情况,研究其对天线辐射性能的影响,综合考虑选择一套最合适的辐射叶结构,并为天线进行双加载和宽带匹配网络的算法优化。仿真结果表明,与现有的普通宽带鞭状天线相比,增益和效率得到了普遍提高,在低频段增益最高提高了3 dB,效率最高提高了5%;在高频段增益最高提高了5 dB,效率最高提高了35%,方向图上翘也得到了一定的抑制,为改善现有的宽带鞭状天线提供一种新的结构设计方法。     

水下近距爆炸作用下弹性钢板处的空化特性研究

弹性钢板在水下近距爆炸作用下,冲击波会使其附近流体形成局部空化,脉动气泡会使流体形成锥形空化。利用平面冲击波理论对局部空化的形成特性进行了研究,理论分析了结构目标尺度的变化对空化区域形成的影响,并通过具体试验对局部空化理论进行了验证,两者符合较好;通过试验和数值仿真方法研究了气泡脉动引起的锥形空化的形成特点,初步分析了锥形空化的形成原因。结果表明,锥形空化对结构具有较大的冲击作用。